| ASHWIN ENGINEERING WORKS |
A pioneering company delivering premium quality Compressors Parts, PTFE Products, Machinery Parts, etc. since 1964....
An Introduction
PTFE products are widely used in areas including Chemical Industries, Aeronautical industries, Battery Industries, Compressor Industries, Civil Engineering, Dairy Industries, Electrical / Electronic Industries, Engineering Industries, Diesel Engines, Hydraulic Industries, Oxygen & Industrial Gas Plant, Pharmaceutical Industries, Pulp & Paper Machinery, Pump Industry, Sugar Industry, and Tyre Industries. The properties of PTFE make it the preferred material for a host of industrial applications and different processing techniques.
PTFE Characteristics & Benefits
The extraordinary characteristics of PTFE make it the ideal choice in a wide range of products and applications. PTFE has a coefficient of friction that is one of the lowest of any material. PTFE is extremely abrasion resistant, making it adaptable to the harshest environments. In addition, PTFE can withstand a wide range of temperatures, from 260 Degrees Centigrade down to -270 Degrees Centigrade, and can even handle brief exposures at higher temperatures. PTFE also has excellent flame resistance due to its extremely high melting point, along with a very low rate of smoke generation and heat release. Another advantage of PTFE is that it is chemically inert and pure, and has no additional stabilizers, lubricants or plasticizers that would taint process fluids.
PTFE products have an extremely long service life, primarily due to PTFE retaining its original properties over a long period of time, even at extreme temperatures, in ultraviolet (UV) light, and when exposed to oils, oxidizing agents and solvents. PTFE also is extremely corrosion resistant, especially to acids, and harsh inorganic and organic chemicals. Additionally, the original properties PTFE remain the same even after extended time periods in water. Furthermore, PTFE is resistant to atmospheric aging in the form of discoloration, oxidation, and, as previously noted, is not affected by ultraviolet light
PTFE Characteristics & Benefits
PTFE
Properties
|
Properties
|
ATM
Method
|
Units
|
Virgin
PTFE
|
Reprocessed
PTFE
|
25%
Glass
PTFE
|
|
Specific
Gravity
|
D792
|
|
2.14-2.20
|
2.15-2.20
|
220-230
|
|
Tensile
Strength
|
D638
|
PSI
|
1500-3500
|
1500-2400
|
2000-3000
|
|
Tensile
Strength
|
D638
|
PSI
|
1500-3500
|
1500-2400
|
2000-3000
|
|
Elongation
|
D638
|
%
|
250-350
|
75-200
|
100-260
|
|
Hardness
|
D1700
|
Durometer
"D"
|
50-60
|
N/A
|
55-65
|
|
Deformation
%
73 0 F, 1500 psi, 24 hours
|
D621
|
N/A
|
4-8
|
N/A
|
1.73
|
|
Deformation
%
100 0 F, 1500 psi, 24 hours
|
D621
|
N/A
|
10-18
|
N/A
|
1.91
|
|
Deformation
%
200 0 F, 1500 psi, 24 hours
|
D621
|
N/A
|
20-25
|
N/A
|
4.57
|
|
Impact
Strength,
Izod
730 0 F Average
170 0 F Average
|
D256
|
Ft./Lb./In.
|
3.00
6.00
|
N/A
|
2.54
3.69
|
|
Water
Absorption
|
D570
|
%
|
0.001
|
N/A
|
0.013
|
|
Coefficient
of Friction
(Static) 73 0 F
|
*3
|
N/A
|
0.04
|
N/A
|
0.085
|
|
Dielectric
Constant
(100 CPS)
|
D150
|
N/A
|
2.00
|
2.26
|
2.4
|
|
Dielectric
Strength (4) (air)
|
D257
|
Volts
|
1000
|
450
|
235
|
|
Coefficient
of Thermal Expansion 73 0 F
|
D696
|
In./In./Ft.
|
5.5
x 10.3
|
N/A
|
2.75
x 10.3
|
|
Coefficient
of Thermal Conductivity
|
*5
|
Btu/hr/ftz
|
1.7
|
N/A
|
3.12
|
|
PV
at 900 ft./min
|
N/A
|
N/A
|
2500
|
N/A
|
15,000
|
|
Color
|
*6
|
N/A
|
white
|
off
white
|
brownish
white
|
Our Guiding Principles
We, at Ashwin Engineering Works, operate against clearly articulated and aligned objectives and strategies. Our company is rooted in the following principles:-
- Personal integrity
- Respect for the Individual
- Doing what's right for the long-term.
Product Range
With a well-trained engineering team and over 40 years of experience, you can trust Ashwin Engineering Works to deliver products efficaciously. We can also supply PTFE Products made from different filled grades of PTFE like Carbon, Glass, Bronze, Graphite, Mos2, Alumina. Our company is engaged in the manufacture, export and supply of the following:-
- PTFE Tubes, Rod & Sheet
- Aeronautical Industry: Insulating Rings, Sealing Rings, Spares, Thread Seal Tapes
- PTFE Compressor as per Customer Requirement
- Air/Gas Compressor Parts: Rod Packing Ring, Guide Ring, Piston Ring, Oil Scraper Ring Sets
- Chemical Plants: Gaskets, Envelop Gasket, Line Bellow, Rope Gasket
- Electrical / Electronics Industry: Balls, Bushes, Nozzles, O Rings, Rods, Machinery Parts
- Diesel Engines: Bushes, Compressor Components, 'O' Rings, Pump Components of PTFE, Rods, Seals Rings Sheets, Valve Components of PTFE
- Hydraulic Industry: Back-up Rings, Cup Seals, 'O' Rings, 'O' Rings Rubber PTFE, Coated, Road Seals, Sealing Rings, Shot Seals, 'U' Seals, 'V' Seals Washers, Wiper Seals
- Instrumentation: Bushes, Compressor Components, Gaskets, 'O' Rings, Packings, Plates, Road Seals, Valve Seals, 'V' Rings, Washers PTFE Coated R.O Rings
- Oxygen & Industrial Gas Plants: Bearings Rings, Compressor Components, Gaskets, Gland Packing Rings, Guide Rings, Greeze (Fully Fluorinated), Heat Sealing Rings, 'O' Rings, Packing with Springs, Piston Rings for Expansion, Engines
- Pharmaceutical Industry: Bushes, Crescent Rings, QVF, Compressors Components, Envelope Gasket, Line Bellow, QVF, Pump Seals, Starer Bellows, Valve Bellows, Compressor Parts
- Pulp & Paper Mills: Bushes, Compressor Components, Thread Seal Taps (TST), Journal Bearings
- Petrochemical Industry: Bushes 'O' Rings, Packing Compressor Components, Valve Components, Greeze fully Flourinated, Sheets
- Pump Industries: Bearings, Bushes (Glass Filed PTFE), Diaphragms, journal Bearings, Rings Gaskets, Thrust Bearings Pads
- Spare Parts Dealers: PTFE/Filled PTFE, Components for Hydraulic Eqpt, Pumps, Valves, Electric/Electronics Application Tapes, Thread Seal Tapes
- Steel Plants: Compressors Components, gaskets, Sheets, Tapes
- Sugar Industry: Bushes, Crescent Rings, QVF, Compressor Components, Line Bellow, QVF, Rods Sheets, Tapes
- Valve Manufacturers: Balls Bushes, Diaphragms, Discs, Gaskets, 'O' Ring, Packing Seal Rings, Valve Seats, Washers, Tapes
- Scientific Parts & Chemical Parts
- PTFE Fabricated - Rings, Washers, Valve Seats, 'O' Rings, Gaskets, Bellows, Diaphragms, Balls, Piston Rings, Wear Rings, Packing Rings, Wear Strips, Mechanical Seals, Impellers, Nozzles, 'V' Rings Set, Stop Cocks, Laboratory Items, and Compressor Spares.
Applications
- Petrochemical and chemical processing
- Electrical applications
- Semi-conductor industry
- Food, beverage, pharmaceutical industries
- Laboratory applications
- Machinery parts
- Compressor parts
- Bearing pads.
Quality
Our quality control measures begin at the initial stage of procuring raw materials. Apart from this, we have the mechanism of "Quality Management System" - whereby all our metal products and PTFE products are checked by a team of quality experts. We, at Ashwin Engineering Works, keep upgrading our machines, systems, techniques and processes to meet the ever changing demands of the industry.
The high-tech lab at our production unit is backed by a computerized system for process monitoring and quality control to ensure consistency and reliability of its entire product range including PTFE Products.
Infrastructure
A team of professionals handles hi-tech manufacturing facilities at Ashwin Engineering Works. Our company is equally competent to execute orders for metal products and PTFE products according to customer specifications as well as standardized production. We employ a team of designers and expert craftsmen who use their skills to develop our exquisite range of PTFE Products and allied items.
An efficient logistics system ensures timely delivery of the products. The enthusiasm and dynamism of our staff, coupled with the consistency in quality and a prompt service, has earned us the reputation of being reliable in the industry all over the world.
| |
| |
